Delta Homecraft Shaper No. 43-110

The Delta Homecraft Shaper No. 43-110 offered unlimited possibilities for making moldings on straight, internal and external curved and irregular surfaces. It enables you to cut building trim, window and door sash and other standard moldings for home repair and maintenance jobs. In addition a multitude of wood joints could be cut including the often used tongue and groove and drawer joint.

Delta Shapers on Ebay

Many of the same features of construction and operation of Delta's larger productions shapers could be found on this shaper.

The basic Delta Homecraft Shaper included the No. 43-110 Shaper, complete with the No. 982 Shaper Fence, No. 43-936 5/16" Spindle, No. 43-935 1/2" Spindle, Table Insert, Starting Pin, Belt and Pulley Guard, Spindle Pulley and Wrenches.

The fence was 25 1/4" long when fully extended. It was completely adjustable front, back, and sidewise. Both sides adjust independently. The table was 15 1/2" by 18" and was finish ground for accuracy. It has a 3/8" by 3/4" groove to accommodate sliding jigs and miter gages. The heavy ribbing on the underside of the table provided added rigidity and firmness.

Interchangeable spindles were available in a 5/16" and 1/2" diameter. They run in sealed-for-life ball bearings. Conveniently located controls were accessible from the front of the shaper to raise and lower the spindle. The spindle lock was accessible on the right side. The shaper was reversible and ran at 9,000 r.p.m for smooth, clean work.

Delta Homecraft Shaper Model No. 43-110

Basic Machine Accessories & Parts

	No. 62-210 1/2 H.P. Motor 1/2 H.P. Ball-bearing Capacitor Start Motor, 3450 r.p.m., 1/2" double shaft, 6" frame complete with cord, plug, and toggle switch. No. 85-080 1 H.P. Motor - A 1 H.P. Repulsion-Induction Motor was offered as an option
	No. 49-316 Reversing and On-Off Switch The reversing switch was an option. Here is the reversing switch with connected 4-wire cord for any standard, split-phase or capacitor motor. The legs of the Homecraft Shaper came pre drilled for mounting the reversing switch.
	No. 43-803 Motor Pulley 5-3/8 motor pulley with set 2 set screws to hold it securely on the 1/2" motor shaft.
	No. 982 Shaper Fence features a fully adjustable fence through a single knob control - both halves of fence independently adjustable for greater safety and convenience in machine set-up.

	No. 43-935 1/2" Spindle For 1/2" hole 3-lip shaper cutters. Interchangeable spindles, including a stub spindle for cope cuts on window and door sash, etc., permitted the use of a whole variety of cutters.
	No. 43-936 5/16" Spindle For 5/16" hole 3-lip shaper cutters
	No. 1198 Table Inserts with Guide Shoulders For shaping with template without the use of collars. 5" x 22" x 1-1/4" thick. 22 lbs.
	3-Lip Shaper Cutters - 1/2" Hole A wide variety of 3-lip shaper cutters are available for the Delta Homecraft Shaper offering unlimited possibilities for making thousands of molding shapes. You could make your own screens, doors, and windows, add fancy trim to furniture, or make all types of special building or furniture trim. The Delta 3-lip shaper cutters were made of special allow steel, hardened and tempered in oil.
	No. 864 Auto-Set Miter Gage The miter gage has a 7 inch face and a 3/8 x 3/4 x 18 inch bar which fits the table slot of circular saws and other machines. It can be set at any angle up to 60 degrees to the right or left, and it has adjustable stops for instantaneous settings at zero and 45 degrees to the right or left. It can be adjusted to compensate for wear or loosening the head by merely loosening or tightening a tapered pivot screw.
	No. 50-810 - Steel Stand with Machine Screws, Nuts and Washers for assembly. This stand gave the operator the correct working height and a rigid base.
	Motor Pulley Guard The Guard completely covers motor, belt and pulley offering greater operator safety. Spring hold down, ring guard and other safety items were available as accessories.
	No. 43-817 Safety Ring Guard In addition to acting as an efficient hold down, the safety ring guard gives you the full protection needed when shaping curved and circular work.
	No. 983 Spring Hold Downs Used in conjunction with the shaper fence on straight shaping operations to firmly hold work against the fence and table.
	No. 1186 Sliding Shaper Jig Makes shaping of short narrow work and other horizontal shaping operations such as cutting tenons and groves easy and safe. Holds work tightly and securely, hands far removed from cutters.

Delta Homecrat Shaper

Delta Homecraft Shaper Model No. 43-110 Specifications

Speed with 3450 r.p.m. motor - 9000 r.p.m.
Spindle travel - 7/8"
Table opening diameters - 3" and 1 3/8"
Table size - 15 1/2" x 18"
Fence size (each side) - 11 1/2" x 3"
Spindle diameters furnished - 5/16" and 1/2"

Capacity:
5/16" spindle (under nut) - 1 1/4"
1/2" spindle (under nut) - 2 3/8"

Overall Dimensions:
Depth - 25 1/2" Width - 25 1/4" Height 10 1/2"
Height table to floor (stand mounted) - 34"

Custom Search

All Other Old Woodworking Tools Articles

Delta Homecraft Tools: Delta produced a series of woodworking machines for the homeowner called the Delta Homecraft Power Tools
Delta Homecraft Jointer: Delta homecraft jointer
Delta Table Saw Jointer Combination Unit: The Delta No. 34-500 8 inch Table Saw Jointer Combination machine offered a compact table saw jointer unit on one stand that used a single motor.
Delta Homecraft Shaper: The Vintage Delta Homecraft Shaper No. 43-110 performed all of the operations commonly done on larger more expensive shapers of its type.
Delta Homecraft Drill Press Model No. 11-100: The Vintage Delta Homecraft drill press was one of the most versatile tools in the wood shop. It wasn't limited to just drilling holes.
Delta Homecraft Band Saw: 10 Inch Delta Homecraft Band Saw Model 28-110
Delta Woodworking tools at Old Woodworking Tools: Information, resources, photographs and more about Delta Woodworking Tools and Machinery.
Delta Unisaw - 10" Tilting Arbor Circular Saw 1949: The Delta Unisaw has been a mainstay of woodworking shops for the past 60 years.
Delta Band Saw Rip Fence: Delta Band Saw Rip Fence
Delta Band Saw (1949) Model No. 28-207: The Band Saw Restoration page is a place for you to share your old band saw restoration tips and stories and upload photos.
Delta Jointer 6 Inch: The Delta Jointer was the standard 6 Inch Jointers in shops of all types.
Delta Finishing Machine - 4" Belt & 12" Disc Sander: The Vintage Delta Finishing Machine No. 31-700 with a 4 Belt & 12 Disc was capable of performing 90% to 95% of all you finishing operations.
Craftsman Woodworking tools at Old-Woodworking-Tools.net: Information and resources about Craftsman Woodworking Tools and Machinery.
Woodworking Machine Manuals at Old Woodworking Tools: Publication reprints of vintage woodworking machine manuals that may be downloaded in a PDF format.
Craftsman Tool Manuals: Craftsman tool manuals and catalogs that can be downloaded for free.
Rockwell Tool Manuals: Download free Rockwell tool manuals and catalogs
Delta Tool Manuals: Download free Delta tool manuals and catalogs
Contribute Content to Old-Woodworking-Tools.net: Help contribute to Old-Woodworking-Tools.net
Share Your Woodworking Machine Photos: Share a photo or information about woodworking tools and machines.
Vintage Delta Tools at Old-Woodworking-Tools.net: Vintage Delta Tools: The Delta Mf. company made some of the most sought after and highest quality American made woodworking tools for many years. On this page you'll find photos, resources and information about some of those woodworking machines.
Vintage Craftsman Woodworking Tools and Machinery at Old-Woodworking-Tools.net: Information and photo sharing about vintage Craftsman tools and woodworking machinery. Share a photo of your vintage Craftsman tools.
Antique Woodworking Tools at Old-Woodworking-Tools.net: Information, photos, and information about antique woodworking tools, tool collecting, Stanely tools and much more.
Walker Turner Power Tools at Old-Woodworking-Tools.net: Walker Turner Power Tools: Photos, Information and resources about Walker Turner Woodworking Tools and Machinery.
Contact Us at Old-Woodworking-Tools.net: Contact us at Old-Woodworking-Tools.net
Woodworking Community: Join the Woodworking Community for discussion, sharing, networking and more!
Vintage Oliver Woodworking Machine Photos: Information and resources and photos of vintage Oliver Woodworking Machinery.
Delta 15" Utility Drill Press: Information and resources for the Delta 15 Utility Drill Press 1963)
Old Woodworking Tools: Old Woodworking Tools Blog - Information and resources and the latest articles posted about old woodworking tools.
Delta 43-205 Heavy Duty Shaper (1951): Information and photos about the Delta 43-205 Heavy Duty Shaper. Includes model numbers, parts list, and machine manual.
Delta 1160 Table Saw: Information and photos of the Delta 1160 Table Saw. Includes description, parts list, recommened motors, and machine manual.
Delta 1426 Disk Sander: Information and photos about the Delta 1426 Disk Sander. This Delta woodworking machines was produced in 1939. Includes parts list, motor recommendations, and more.
Vintage Powermatic Tools: Share a photo of your vintage PowerMatic tools.
Jet Woodworking Tool Photos: Share a photo of your Jet Woodworking Tool Photos.
Powermatic Model 221 Planer: Information and photos of the Powermatic Model 221 Planer
Powermatic Model 66 Table Saw: Information and resources about the Powermatic Model 66 Table Saw
Boice Crane Woodworking Tools at Old-Woodworking-Tools.net: Boice Crane Woodworking Tools: Photos, Information and resources about Boice Crane Woodworking Tools and Machinery.
Boice Crane 14" Band Saw at Old Woodworking Tools: Infomation, resources, and photos of the Boice Crane 14
Table Saws: Information about table saws including the features found in bench, contractors, and cabinet saws, mobile and stationary saws. Also ncludes information and linked to vintage table saws as well as newer models.
Band Saws at Old-Woodworking-Tools.net: Information and resources about band saws.
General Woodworking Tools: Information and resources for General Woodworking Tools, table saws, band saws, jointers, shapers, sanders, etc.
Woodworking Tool Reviews: Read or write a review of the Woodworking tools listed here.
Old Woodworking Tools Network: A place for old woodworking tool enthusiasts to share photos, stories, and more
Woodworking Supplies & Equipment: Woodworking-Supplies & Equipment including tools, hardware, supplies, woodworking plans and more.
Wood Lathes: Information about wood lathes including a description of the features and considerations for purchasing one as well as links to a variety of vintage and modern wood lathes.
Jointer at Old-Woodworking-Tools.net: Photos, information and resources about the woodworking jointer. The jointer can machine a face or edge of a board perfectly flat and straight.
Delta Table Saw: Information and resources about the Delta Table Saw.
Radial Arm Saw at Old-Woodworking-Tools.net: Photos, Information and resources about the radial arm saw.
Scroll Saw at Old-Woodworking-Tools.net: Photos, Information and resources about the scroll saw, a popular woodworking tool for cutting curves and irregular shaped pieces.
Best Woodworking Shop Tips Contest 2010: Enter the Best Woodworking Shop Tips Contest and win a $100 gift card from Rockler Woodworking
Woodworking Shop Notes: Learn more about woodworking, tools, projects, supplies and more.
Old Woodworking Tools: Old Woodworking Machinery
Woodworking Machine Manufacturers: Information and resources woodworking machine manufacturers.
Old Woodworking Tools: Information and resources about the drill press, one of the most versatile pieces of equipment in the shop.
Belt and Disc Sander at Old-Woodworking-Tools.net: Belt and Disc Sander - Information, photos, and resources about abrasive tools for woodworking including the belt and disc sander.
Wood Shaper at Old-Woodworking-Tools.net: Wood Shaper - Photos, Information and resources about the wood shapers also known as the spindle shaper.
Stanley Planes at Old Woodworking Tools: Photographs and information about Stanley Planes.
Stanley Hand Planes: Information, photos, and resources about Stanley Hand Planes.
Craftsman Table Saw Parts: Information, photos, and resources about Craftsman table saw parts.
Stanley Planes | Old-Woodworking-Tools.net: Share a photo of your collectable Stanley Planes.
Share Your Vintage Craftsman Table Saws: Share a photo of your vintage Craftsman drill press.
Share Your Vintage Craftsman Table Saws: Share a photo of your vintage Craftsman band saws.
Share Your Vintage Craftsman Table Saws: Share a photo of your vintage Craftsman Scroll saws.
Share Your Vintage Craftsman Table Saws: Share a photo of your vintage Craftsman table saws.
Vintage Delta Table Saws at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta table saws.
Vintage Delta Band Saws at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta band saws.
Vintage Delta Radial Arm Saws at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta radial arm saws.
Vintage Delta Drill Press at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta Drill Presses.
Vintage Delta Shapers at Old Woodworking Tools.net: Information, resources, machine manuls and photos of vintage Delta table shapers.
Vintage Delta Lathes at Old Woodworking Tools.net: Information, resources, machine manulas and photos of vintage Delta lathes.
Vintage Delta Jointers at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta jointers.
Vintage Delta Scroll Saws at Old Woodworking Tools.net: Information, resources, machine manuals, and photos of vintage Delta scroll saws.
Old Woodworking Tool Parts for Sale: Old Woodworking Tool Parts for Sale - See our store for parts from vintage Delta and Craftsman woodworking tools and much more.
Stanley Woodworking tools at Old Woodworking Tools: Information, photographs, and the history of Stanley Woodworking Tools.
Stanley Planes at Old Woodworking Tools: Photographs and information about Stanley Planes.
Sargent Woodworking Tools: Information, photos, and resources about Stanley Hand Planes.
Stanley Woodworking Tools: Information, photos, and resources about Stanley Hand Planes.
Woodworking Tools for Sale: Antique woodworking tools for sale.

This site proudly build with Site Build It!

[?] Subscribe To This Site

Delta Homecraft Shaper No. 43-110

Basic Machine Accessories & Parts

All Other Old Woodworking Tools Articles

Old Woodworking

Machinery

Companies

Parts & Accessories

Antique Hand Tools

Woodworking